Installation Methods of LED Point Light

Installation Methods of LED Spot Light Sources:

1. Clip and Screw Installation: Lock the clip onto the installation surface, and then snap the fixture into the clip.

2. Clip and Glue Installation: Use exterior project glue to adhere the clip to the installation surface, and then snap the LED spot light source into the clip.

3. Clip and Steel Wire Installation: Snap the clip onto the steel wire, and then snap the fixture into the clip.

4. Profile Lock Bracket Installation 1): Lock two installation brackets onto the installation surface at a fixed distance, screw the fixture onto the aluminum profile, and then lock the profile with the fixture attached onto the installation brackets.

Profile Lock Bracket Installation 2): Lock two installation brackets onto the installation surface at a fixed distance, use a connecting clip to snap the fixture onto the aluminum profile, and then lock the profile with the fixture attached onto the installation brackets.

Profile Lock Bracket Installation 3): Lock two installation brackets onto the installation surface at a fixed distance, use a fixture with a clip-on lampshade to twist onto the aluminum profile, and then lock the profile with the fixture attached onto the installation brackets.

5. Profile Lock Wall Installation 1): Screw the fixture onto the aluminum profile, and then lock the profile with the fixture attached onto the installation wall.

Profile Lock Wall Installation 2): Use a connecting clip to snap the fixture onto the aluminum profile, and then lock the profile with the fixture attached onto the installation wall.

Profile Lock Wall Installation 3): Use a fixture with a clip-on lampshade to twist onto the aluminum profile, and then lock the profile with the fixture attached onto the installation wall.

6. Installation for Non-Flat Surfaces: Such as on diagonal cables of large diameter steel cables on bridges, a clamping method can be used: first, lock the clamp onto the large diameter steel cable, and then lock the aluminum profile with the fixture ontothe clamp.

7. Other Installation Methods: Can be separately developed and designed according to the actual project needs.