LED Wall Washer Series Products Installation Guide
Pre-installation Cautions:
- Please read this manual carefully before use.
- If you are not a professional technician, do not attempt to repair or modify the product.
- Turn off the power before installation to avoid electric shock due to improper operation.
- Check if the voltage marked on the wall washer matches the input voltage to prevent damage to the LED wall washer.
- To ensure the product's lifespan, do not use it in areas with dense acid mist.
- During installation and transportation, be cautious of shock damage.
- Ensure the installation site can bear ten times the weight of the product and is flat with no vibration, sway, or fire hazards.
- If the fixture malfunctions, collect all faulty lights in one place and return them to our company for testing and repair.
- If the lamp's wire is damaged, immediately cut off the power and cease use.
Installation Instructions:
- Firstly, secure the fixture firmly with screws.
- Connect the light fixture to the power line securely; insulate unused wire ends with waterproof tape.
- When wiring, a single power branch should connect no more than 8-10 wall washers; or connect to another power line after 50 meters.
- After installation, inspect the wiring to confirm that the installation is correct without any electrical shorts, then connect the corresponding control power.
- If you encounter any problems during installation, please consult our company’s technical staff.
DMX512 External Control LED Wall Washer Installation Diagram:
Note: This diagram is based on a wall washer working voltage of AC220V as an example. If the wall washer voltage is AC24V, then the input voltage must be AC24V.
Single color/Internal Control LED Wall Washer Installation Diagram:
Note: This diagram is based on a wall washer working voltage of AC220V as an example. If the wall washer voltage is AC24V, then the input voltage must be AC24V.